Antec CS-52553CB Manual de usuario descargar pdf (Pagina 4)

3. Connect the Power Switch (labeled POWER SW) to the PWR connector on the

motherboard.

4. Connect the Hard Drive LED (labeled H.D.D. LED) to the HDD LED connector

on the motherboard.

Connecting the USB Ports

Note: Please check your motherboard manual for your USB header pin layout and

make sure it matches the attached table. If it does not match this Intel standard,

please call Antec customer support at (800) 22ANTEC (North America) or at

+31 (0) 10 462-2060 (Europe) to buy a USB adapter (SKU#30095). This adapter

will allow you to connect the top USB to your motherboard on a pin-by-pin basis.

Motherboard Pin Layout

Connecting the IEEE 1394 (FireWire®, i.Link®) Port

Note: Please check your motherboard manual for your IEEE 1394 header pin

layout and make sure it matches the attached table. If you intend to connect the

front FireWire port to an IEEE 1394 add-on card that comes with an external-type

IEEE1394 connector, please call Antec customer service at (800) 22ANTEC (North

America) or +31 (0) 10 462-2060 (Europe) to buy an adapter (SKU#30031).

This adapter will allow you to connect the top IEEE 1394 port to the external-type

connector.

Pin Assignment for Front Panel IEEE 1394 Connector

Connecting the Audio Ports

For a non-Intel standard audio connection, you will need to plug the 7 individual

connectors onto the motherboard as follows.

Locate the internal audio connectors from your motherboard or sound card.

Consult your motherboard or sound card manual for the pin-out positions.

1. Microphone Signal Pin: Connect the MIC connector to this pin.

2. Microphone Power: Connect the MIC-BIAS connector to this pin.

3. Ground Pin: Connect the AUD GND connector to this pin.

Pin Signal Names Pin Signal Names

USB Power 1

USB Power 2

Negative Signal 1

Negative Signal 2

Positive Signal 1

Positive Signal 2

Ground 1

Ground 2

Key (No Connection)

Empty Pin

Pin Signal Names Pin Signal Names

1 TPA+ 2 TPA–

3 Ground 4 Ground

5 TPB+ 6 TPB–

7 +12V (Fused) 8 +12V (Fused)

9 Key (No Pin) 10 Ground

109

1 2 3 4 5 6 7 8 9

Comentarios a estos manuales

Sin comentarios

Antec CS-52553CB Manual de usuario Pagina 4

Comentarios a estos manuales

Relacionado con productos y manuales para Cajas De Ordenadores Antec CS-52553CB