Antec GX700 Manual de usuario descargar pdf (Pagina 18)

Use the grommet-lined cable routing holes to route PSU cables.

2.8 Cable Management

There is a cable management compartment between the motherboard and right side panel, as well as

cable ties located on the back of the motherboard panel. You can tuck excess cables in this

compartment or route them to the drive bays.

Choose the cables you would like to pass through the holes behind the motherboard tray. Pull them

through the hole toward the right side of the case.

Use the cable ties provided to hold your cables in place. Cable ties can be anchored to tiedown locations

on the back of the motherboard panel.

For cables which will be routed back to front drives or other internal accessories, feed the cables back

through the insertion point nearest the destination of the cable. Connect the cable and then pull the

slack back to the right side of the case.

For cables which will be routed directly to front drives or other internal accessories, cable tiedowns are

located along the drive cage. Bundle front drives’ or other internal accessories’ cables together and

secure them using tiedowns.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24 25

Sin comentarios

Antec GX700 Manual de usuario Pagina 18