Antec Nine Hundred Manual de usuario descargar pdf (Pagina 3)

Installing the Motherboard

This manual is not designed to cover CPU, RAM, or expansion card installation.

Please consult the motherboard manual for specific mounting instructions and

troubleshooting. Before proceeding, check the manual for your CPU cooler to find

out if there are steps you must do before installing the motherboard.

1. Lay the case down so that the open side is up.

2. Make sure you have the ap-

propriate I/O panel for the

motherboard. If the panel

provided is not suitable for

the motherboard, please

contact the mother board

manufacturer for the correct

I/O panel.

3. Line up the motherboard with the stand-

off holes. Determine which holes line up

and remember where they are. Not all

motherboards will match with all of the

provided screw holes, and this is not

necessary for proper functionality. Some

standoffs may be pre-installed for your

convenience.

4. Lift up and remove the motherboard.

5. Screw in the brass standoffs to the

threaded holes that line up with the

motherboard.

6. Place the motherboard on the brass

standoffs. Screw in the motherboard

to the standoffs with the provided

Phillips-head screws.

7. The motherboard is now installed.

1 2 3 4 5 6 7 8 9 10

Sin comentarios

Antec Nine Hundred Manual de usuario Pagina 3